2.5 Axis Milling

2.5D strategies are used for machining of parts composed of pockets, islands, slots, vertical sides, flat faces and holes.

Typically these would be electronic component housings, stamps and dies. SprutCAM creates both roughing and finishing tool paths. SprutCAM includes powerful automatic geometry recognition. All types of hole machining operations are supported.

2.5-axis machining is a set of strategies for the generation of slots, pockets, holes, horizontal areas, vertical walls and chamfers. 2.5-axis machining also comprises plotting of the path by some control closed and open curves, engraving of text and artistic elements on the flat areas.

Standard operations of this type of machining:

  • Parallel access
  • Equidistant access
  • Horizontal area machining with automatic detection of horizontal faces
  • Vertical wall machining (including the use of a spiral path)
  • Pocket machining
  • Hole machining (centering, drilling, drilling-out, hole enlarging, milling, thread cutting)
  • Machining along the contour
  • Engraving

SprutCam 3D graphic


Special consideration should be given to the capability of SprutCAM system to create 3D graphic presentation of the part, taking a set of the closed curves as a basis.

Having the drawing of the detail, constituting a set of high spots, low spots and holes, a technologist, having defined the type and the parameters for each element in the system, obtains the visual three-dimensional display of the part, which considerably simplifies the formation of the technological process of machining.

When the contour parameters are changed and corrected the system automatically reconfigures three-dimensional display of the part.

Automatic detection

Automatic detection of horizontal areas simplifies the process of surface determination, for instance, for performing the final machining after the upstream operations, surface preparation for the subsequent engraving or locating.

Pocket and separate island sampling

Pocket and separate island sampling may be performed by parallel cuts of the tool as well as by equidistant cuts. Capability of smoothing the path in the angles, radial cusp rolling and high performance cutting in function allow the use of the sampling operations for  high performance сutting (HPC).

The system has the ability

The system has the ability to create texts in the form of a set of curves, which further can be used, for example, for engraving on the flat areas of the part.

The engraving operation itself is also used for obtaining the artistic elements and it gains widespread acceptance in woodworking and jewelry industry.  

2D contouring operation offers the possibility to interactively form the approaches and the backward movements as well as the areas of correction turning off and on in the graphic window of the system without using operation parameter windows.

The system possesses

The system possesses the function of automatic detection of holes by 3D model with a flexible set of search conditions.

The parameters of the detected holes (diameter, depth) are automatically taken into consideration in the technological process of machining.

The capability of generating the hole system enables to obtain a set of holes of different configurations with defined parameters, which certainly will simplify the task where it is necessary to create the path for machining the parts with a large number of systematically positioned holes.

Share This